LEMON Manuals: Even more car manuals for everyone

Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Stability Control System (ASC) -- Lancer >> Diagnosis >> Symptom Procedures >> Inspection Procedure 1: Scan tool communication with ABS/ASC system is impossible >> Comments On Trouble Symptom

Comments On Trouble Symptom

When scan tool cannot communicate with the ABS/ASC system, the CAN bus lines, ASC-ECU power supply circuit system, ground, or ASC-ECU may be faulty.

scientia non olet · About LEMON Manuals