LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Stability Control System (ASC) -- Lancer >> Diagnosis >> Diagnostic Trouble Code Procedures >> DTC U1003 G and yaw rate sensor bus-off >> DTC Set Conditions

DTC Set Conditions

This DTC is set when the communication error occurs in the exclusive CAN bus communication between the ASC-ECU and the G and yaw rate sensor.

scientia non olet · About LEMON Manuals