LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mitsubishi
>>
2010
>>
Lancer ES, Standard
>>
Repair and Diagnosis
>>
Brakes
>>
Traction Control
>>
Active Stability Control System (ASC) -- Lancer
>>
Diagnosis
>>
Diagnostic Trouble Code Procedures
>>
DTC U0125 G and yaw rate sensor message time-out error/message error
>>
Probable Causes
Probable Causes
Wiring harness or connector failure for the special CAN bus lines between ASC-ECU and the G and yaw rate sensor
G and yaw rate sensor malfunction
ASC-ECU malfunction
External noise interference