| Cannot communicate with KOS-ECU using the scan tool. |
1 |
INSPECTION PROCEDURE 1: CANNOT COMMUNICATE WITH KOS-ECU USING THE SCAN TOOL |
| The keyless operation key cannot be registered using scan tool. |
2 |
INSPECTION PROCEDURE 2: THE KEYLESS OPERATION KEY CANNOT BE REGISTERED USING SCAN TOOL |
| Abnormality in KOS-ECU power supply and ground circuits. |
3 |
INSPECTION PROCEDURE 3: ABNORMALITY IN KOS-ECU POWER SUPPLY AND GROUND CIRCUITS |
| Keyless operation warning display does not disappear. |
4 |
INSPECTION PROCEDURE 4: KEYLESS OPERATION WARNING DISPLAY DOES NOT DISAPPEAR |
| IG knob will not turn (keyless operation is not recognized). |
5 |
INSPECTION PROCEDURE 5: IG KNOB WILL NOT TURN (KEYLESS OPERATION IS NOT RECOGNIZED) |
| The engine will not start with KOS (IG knob operates normally). |
6 |
INSPECTION PROCEDURE 6: THE ENGINE WILL NOT START WITH KOS (IG KNOB OPERATES NORMALLY) |
| Engine does not start with emergency key. |
7 |
INSPECTION PROCEDURE 7: ENGINE DOES NOT START WITH EMERGENCY KEY |
| No door will be locked or unlocked by operating a lock switch on any door, or by touching the unlock sensor. |
8 |
INSPECTION PROCEDURE 8: NO DOOR WILL BE LOCKED OR UNLOCKED BY OPERATING A LOCK SWITCH ON ANY DOOR, OR BY TOUCHING THE UNLOCK SENSOR |
| Driver's door lock switch does not work. |
9 |
INSPECTION PROCEDURE 9: DRIVER'S DOOR LOCK SWITCH DOES NOT WORK |
| Driver's door unlock sensor does not work. |
10 |
INSPECTION PROCEDURE 10: DRIVER'S DOOR UNLOCK SENSOR DOES NOT WORK |
| Front passenger's door lock switch does not work. |
11 |
INSPECTION PROCEDURE 11: FRONT PASSENGER'S DOOR LOCK SWITCH DOES NOT WORK |
| Front passenger's door unlock sensor does not work. |
12 |
INSPECTION PROCEDURE 12: FRONT PASSENGER'S DOOR UNLOCK SENSOR DOES NOT WORK |
| Trunk lid opener switch does not work. |
13 |
INSPECTION PROCEDURE 13: TRUNK LID OPENER SWITCH DOES NOT WORK |
| Keyless entry system does not work. |
14 |
INSPECTION PROCEDURE 14: KEYLESS ENTRY SYSTEM DOES NOT WORK |
| KOS timer lock function does not work. |
15 |
INSPECTION PROCEDURE 15: KOS TIMER LOCK FUNCTION DOES NOT WORK |
| Keyless entry hazard light answerback function, the dome light answerback function or the horn answerback function does not work normally. |
16 |
INSPECTION PROCEDURE 16: KEYLESS ENTRY HAZARD LIGHT ANSWERBACK FUNCTION, THE DOME LIGHT ANSWERBACK FUNCTION OR THE HORN ANSWERBACK FUNCTION DOES NOT WORK NORMALLY |
| The trunk is not opened when the keyless operation key "TRUNK" button is operated. |
17 |
INSPECTION PROCEDURE 17: THE TRUNK IS NOT OPENED WHEN THE KEYLESS OPERATION KEY "TRUNK" BUTTON IS OPERATED |
| Outer tone alarm does not sound. |
18 |
INSPECTION PROCEDURE 18: OUTER TONE ALARM DOES NOT SOUND |
| Power door locks with selective unlocking does not work. |
19 |
INSPECTION PROCEDURE 19: POWER DOOR LOCKS WITH SELECTIVE UNLOCKING DOES NOT WORK |