Power Window Main Switch
TERMINAL REFERENCE CHART
| Terminal No. | Check items | Check conditions | Normal conditions |
|---|---|---|---|
| 1 | Output to power window motor (Passenger's side) | - | - |
| 2 | Output to power window motor (Driver's side) | - | - |
| 3 | Output to power window motor (Passenger'side) | - | - |
| 4 | Power supply | Power window relay: ON | Battery positive voltage |
| 5 | Power supply | Always | Battery positive voltage |
| 6 | Output to power window motor (Driver's side) | - | - |
| 7 | LIN communication line (between ETACS-ECUs) | Always | 0 to 12 V (pulse signal) |
| 8 | Input from power window motor (Pulse sensor signal) | When the power windows are operating | 0 to 5 V (pulse signal) |
| 9 | Input from power window motor (Pulse sensor ground) | - | 0.5 V or less |
| 10 | Ground | Always | 1 V or less |
| 11 | Input from power window motor (Pulse sensor signal) | When the power windows are operating | 0 to 5 V (pulse signal) |
| 12 | Input from power window motor (Power supply to pulse sensor) | When the power windows are operating | 5 V |
| 13 | - | - | - |
| 14 | - | - | - |
| 15 | Output to power window motor (Rear right side) | - | - |
| 16 | - | - | - |
| 17 | Output to power window motor (Rear right side) | - | - |
| 18 | Output to power window motor (Rear left side) | - | - |
| 19 | Output to power window motor (Rear left side) | - | - |