LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Multi-Media Communications System (MMCS) - Lancer >> Diagnosis >> Service Mode >> Speaker Check

Speaker Check

  1. Select "Speaker Check" on "Service" screen.
    Fig 1: Screen Display - Service
    G06669496Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Select a speaker to be checked, and play test tone through the speaker.
    NOTE:
    • "FTWL", "FTWR", "RW" are displayed for vehicles with audio amplifier only.
    • Volume cannot be adjusted while test tone is being played.
    • During the test, only the selected speaker sounds. If "Back" is selected during the test, the test tone will disappear.
      Fig 2: Screen Display - Speaker Check
      G06669497Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.