Sensor Check

The speed sensor and gyro sensor will be checked, depending on the vehicle conditions such as driving condition, stationary condition and travel direction change.

1. Select "Sensor Check" on "Service" screen.
   Fig 1: Screen Display - Service

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2. The sensor check with the vehicle stationary will be executed in accordance with the screen.
   Fig 2: Screen Display - Sensor Check

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
   Fig 3: Screen Display - Sensor Check

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
3. The sensor check with the vehicle in motion will be executed in accordance with the screen.
   Fig 4: Screen Display - Sensor Check

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
4. When the sensor checks are complete, the screen will display the check results.
   NOTE: If there is "NG" or "N/A" as the check results, select "NG Code" on the "Sensor Check" screen. Then "NG code Indication" screen will show the NG code.
   Fig 5: Screen Display - Sensor Check

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
   NG CODE REFERENCE TABLE FOR SENSOR CHECK
   
   

   Sensor classification	NG code No.	Error items
   Gyro sensor	1	Offset error while the vehicle is stationary (lower limit error)
   	2	Offset error while the vehicle is stationary (upper limit error)
   	5	Output error during driving
   Speed sensor	6	Output error while the vehicle is stationary

   Fig 6: Screen Display - NG Code Indication

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.