Erase The PASSCODE

The 4-digit passcode set by security function can be erased by operating the hang-up switch.

1. Turn the ignition switch to the "ON" or "ACC" position, and check if the radio and CD player or the audio visual navigation unit is activated.
2. Check that the hands free cellular phone system is not in voice recognition mode.
3. Press and hold the hang-up switch for approximately 2 seconds (1.5 seconds or more).
4. Within approximately 10 seconds after performing step  3, press and hold the hang-up switch for approximately 2 seconds (1.5 seconds or more) twice again.
   NOTE: Even if the passcode is erased, guidance such as voice guide is not provided.
5. After the operation, check if the lock with the passcode is unlocked. If the lock is not unlocked, repeat from step  2.
   Fig 1: Identifying Speech Switch, Pick-Up Switch And Hang-Up Switch

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.