Diagnostic Trouble Code Chart
CAUTION:
On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnostic trouble code(s) associated with other system may be set. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
ETACS-ECU
TROUBLE CODE CHART
| DTC No. | Diagnostic item | Reference |
|---|---|---|
| B16A2 | Blown turn-signal light (LH) bulb | |
| B16A3 | Turn-signal light (LH) short circuit | |
| B16A4 | Blown turn-signal light (RH) bulb | |
| B16A5 | Turn-signal light (RH) short circuit |
LIN
TROUBLE CODE CHART
| DTC No. | Diagnostic item | Reference | ||
|---|---|---|---|---|
| L0432 | RLS(1) RS adaptation error | |||
| L0434 | RLS(1) rain sensor error | |||
| L0436 | RLS(1) light sensor error | |||
|
||||