LEMON Manuals: Even more car manuals for everyone

Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Time And Alarm Control System (ETACS) - Lancer >> Troubleshooting >> Input Signal Procedures >> Inspection Procedure 8: ETACS-ECU does not receive any signal from the rear door switch (RH) >> Notes

Inspection Procedure 8: ETACS-ECU does not receive any signal from the rear door switch (RH): Notes

Fig 1: Rear Door Switch (RH) Input Circuit Diagram

G06673673

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

scientia non olet · About LEMON Manuals