LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mitsubishi
>>
2010
>>
Lancer ES, Standard
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Communication Devices
>>
Electronic Time And Alarm Control System (ETACS) - Lancer
>>
Troubleshooting
>>
Input Signal Procedures
>>
Inspection Procedure 5: ETACS-ECU does not receive any signal from the front door switch (LH)
>>
Troubleshooting Hints
Troubleshooting Hints
The front door switch (LH) may be defective
The ETACS-ECU may be defective
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector