LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Overhaul <2.0L Non-Turbo> - Lancer >> Oil Pump Chain >> Removal And Installation >> Installation Service Points >> >>C<< Oil Pump Sprocket/Oil Pump Chain/Oil Pump Chain Guide/Oil Pump TENSIONER Lever Installation

>>C<< Oil Pump Sprocket/Oil Pump Chain/Oil Pump Chain Guide/Oil Pump TENSIONER Lever Installation

  1. Set the Number 1 piston at top dead center on the compression stroke.
  2. Using the special tools MB991346, install the oil pump sprocket to the oil pump case.
  3. Install the oil pump chain to the crankshaft sprocket.
  4. Install the oil pump chain to the oil pump sprocket.
    Fig 1: Tightening Oil Pump Sprocket
    G06671070Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals