LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Overhaul <2.0L Non-Turbo> - Lancer >> Oil Pan And Timing Chain Case >> Removal And Installation >> Installation Service Points >> >>B<< Front Oil Seal Installation

>>B<< Front Oil Seal Installation

  1. Apply engine oil to the internal circumference of the oil seal.
  2. Use special tool MB991448 to install the front oil seal on the timing chain case.
    Fig 1: Installing Front Oil Seal
    G06670998Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals