LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling -- Lancer >> Water Hose And Water Pipe >> Removal And Installation (2.0L Engine Non-Turbo, 2.4L Engine) >> Installation Service Points >> >>C<< Radiator Upper Hose Connection

>>C<< Radiator Upper Hose Connection

  1. Insert radiator upper hose as far as the projection of the cooling water outlet hose fitting.
  2. Align the mating marks on the radiator upper hose and hose clamp, and then connect the radiator upper hose.
    Fig 1: Aligning Mating Marks On Radiator Lower Hose And Hose Clamp
    G06671780Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals