LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling -- Lancer >> Thermostat >> Removal And Installation (2.0L Engine Turbo) >> Installation Service Points >> >>B<< Radiator Lower Hose Connection

>>B<< Radiator Lower Hose Connection

  1. Insert the radiator lower hose as far as the projection of the cooling water inlet hose fitting.
  2. Align the mating marks on the radiator lower hose and hose clamp, and then connect the radiator lower hose.
    Fig 1: Aligning Mating Marks On Radiator Lower Hose And Hose Clamp
    G06671769Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals