LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Eclipse Spyder GS, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Automatic Transaxle Overhaul (F4A4B)) >> Valve Body >> Disassembly And Assembly >> Assembly Service Points >> >>A<< Spring/Steel Ball/Damping Valve And Damping Valve Spring Installation

>>A<< Spring/Steel Ball/Damping Valve And Damping Valve Spring Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the steel balls (two pieces) and springs (two pieces) to the inside valve body as shown.
  2. Install the damping valve and spring to the inside valve body as shown.
Fig 1: Installing Steel Balls And Springs To Inside Valve Body
G06245693Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals