Section 14 (MULTIPORT Fuel Injection (MFI) (3.8L) - Reference Tables, ECM/Pcm Check, Special Tools, On-Vehicle Service, R & I, Specifications)
WARNING: This page is about a different variant/trim than selected.
- Data List Reference Table
- General Scan Tool (GST) Mode 01 Reference Table
- Actuator Test Reference Table
- Check At The Engine Control Module (ECM)
Or The Powertrain Control Module (Pcm) - Inspection Procedure Using An Oscilloscope
- Special Tools
- On-Vehicle Service
- Component Location
- Throttle Body (Throttle Valve Area) Cleaning
- Fuel Pressure Test
- Fuel Pump Connector Disconnection (How To Reduce Pressurized Fuel Lines)
- Fuel Pump Operation Check
- MULTIPORT Fuel Injection (MFI) Relay And Throttle Actuator Control Motor Relay Continuity Check
- Fuel Pump Relay Continuity Check
- Intake Air Temperature Sensor Check
- Engine Coolant Temperature Sensor Check
- Heated Oxygen Sensor Check
- Injector Check
- Throttle Actuator Control Motor Check
- Engine Oil Control Valve Check
- Evaporative Emission Purge Solenoid Check
- Evaporative Emission Ventilation Solenoid Check
- EGR Valve Check
- Injector
- Throttle Body Assembly
- Engine Control Module (ECM) And Powertrain Control Module (Pcm)
- Specifications