LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mitsubishi
>>
2010
>>
Eclipse Spyder GS, Standard
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Gauges & Instrument Panels
>>
Combination Meter
>>
Symptom Procedures
>>
INSPECTION PROCEDURE 2: Power supply circuit.; INSPECTION PROCEDURE 3: Odometer and trip meter are not displayed.; INSPECTION PROCEDURE 4: No needle meters work.; INSPECTION PROCEDURE 5: When the ignition switch is turned to the ON position, the indicator and warning lights do not illuminate
>>
Possible Causes
Possible Causes
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
Malfunction of the combination meter