LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Automatic Air Conditioning >> Automatic A/C Diagnosis >> Symptom Chart

Symptom Chart

CAUTION: During diagnosis, a DTC code associated with another system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for DTC code(s). If DTC code(s) are set, erase them all.
SYMPTOM CHART

Symptom Inspection procedure
When the A/C is operation, temperature inside the passenger compartment does not decrease (Cool air is not emitted). 1
Malfunction of the A/C power supply system. 2
The compressor does not work. 3
Blower fan and motor do not turn. 4
Blower air amount cannot be changed. 5
Outside/inside air changeover is not possible. 6
A/C outlet air temperature does not increase. 7
Air outlet vent cannot be changed. 8
Rear window defogger does not operate. 9
Blower motor power supply system. 10