DTC Set Conditions

WARNING: This page is about a different variant/trim than selected.

If the following conditions are met, AWD-ECU gradually reduces the AWD control torque to the specified torque, flashes the AWD/LOCK indicators alternately, and sets the DTC No. C1078.

AWD selector switch: AWD/LOCK
If the vehicle is driven with abnormal tire pressure or tires of different brands.
If the difference in rotation speed between the front and rear wheels exceeds a specific value continuously, the DTC No. C1078 is set, the AWD/LOCK indicators flash alternately, and the mode is switched to the 2WD mode.