Shift Lock Mechanism Check

WARNING: This page is about a different variant/trim than selected.

SYSTEM CHECK

SHIFT LOCK MECHANISM

Inspection procedure	Check condition		Items to be checked (Normal conditions)	Possible cause of abnormality
1	Brake pedal not depressed	Ignition switch position: LOCK, ACC or removed	The selector lever cannot be moved out of the "P" position	Abnormality in the shift lock link (stuck, disengaged, broken, etc.) Abnormality in the electrical circuit (short circuit in the switches or harnesses) Abnormality in the key interlock mechanism
2	Brake pedal depressed	Ignition switch position: LOCK, ACC or removed		Abnormality in the electrical circuit (short circuit in the switches or harnesses) Abnormality in the key interlock mechanism
3	Brake pedal not depressed	Ignition switch position: ON		Abnormality in the shift lock link (stuck, disengaged, broken, etc.) Abnormality in the electrical circuit (short circuit in the switches or harnesses)
4	Brake pedal depressed		The selector lever can be moved from the "P" position to other positions smoothly.	Abnormality in the shift lock link (stuck, disengaged, broken, etc.) Abnormality in the electrical circuit (short circuit in the switches or harnesses)
5	Shift lock release button pressed			Abnormality in the shift lock link (stuck, disengaged, broken, etc.)
6	Brake pedal depressed / not depressed		The selector lever can be moved from the "R" position to the "P" position smoothly.	Abnormality in the shift lock link (stuck, disengaged, broken, etc.)