LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (CVT - On-Vehicle Service & Diagnosis) >> Diagnosis >> Hydraulic Pressure Test >> Hydraulic Pressure Test Diagnosis Table

Hydraulic Pressure Test Diagnosis Table

WARNING: This page is about a different variant/trim than selected.
HYDRAULIC PRESSURE TEST DIAGNOSIS CHART

Symptoms Faulty parts
Hydraulic pressure is high at all measuring points. Incorrect measuring method
Hydraulic pressure is low at all measuring points. Malfunction of oil pump
Clogged oil strainer
Clogged oil cooler
Malfunction in valve body assembly
Improper installation of valve body assembly
Only forward clutch pressure is abnormal. Malfunction in valve body assembly
Improper installation of valve body assembly
Faulty seal ring A
Only reverse brake pressure is abnormal. Malfunction in valve body assembly
Improper installation of valve body assembly
Only primary pressure is abnormal Malfunction in valve body assembly
Improper installation of valve body assembly
Only line pressure is abnormal. Malfunction in valve body assembly
Improper installation of valve body assembly
Only torque converter output pressure is abnormal Malfunction in valve body assembly
Improper installation of valve body assembly
Malfunction of torque converter
Faulty seal ring B