Diagnostic Procedure
WARNING: This page is about a different variant/trim than selected.
- STEP 1. Check other diagnosis codes.
Q: Are other diagnosis codes set?
YES : Carry out the appropriate troubleshooting.
NO : Go to Step 2.
- STEP 2. Symptom recheck after erasing diagnosis code
Q: Is the check result normal?
YES : Intermittent malfunction
NO : Replace the TCM, and then go to Step 3.
- STEP 3. Retest the system.
Q: Is the check result normal?
YES : The inspection is complete.
NO : Replace the valve body assembly.