Speaker Connection Check Mode < Vehicles Without MMCS >

Enter the speaker connection check mode according to the following steps:

1. Turn the Ignition switch to the "ACC" or "ON" position and switch off the radio and CD player or CD changer.
2. Press the following buttons in that order within sixty seconds from step (1).
   Fig 1: Identifying Sound Adjustment Switch

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
   1. [CH1] button
   2. Rewind button
   3. Fast-forward button
   4. [CH6] button
3. Check that the speaker, which is displayed on the center panel display, sounds (If the [CH6] button is pressed, the speaker will be changed).
   NOTE: The display of "FL", "FR", "RL", "RR", "RW" blinks.
4. If a button other than the [CH6] button is pressed, or the ignition switch is turned to "LOCK" (OFF) position, you will exit from the speaker connection check mode.
   Fig 2: Identifying Speaker Pattern

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.