Steering Wheel Voice-Control Switch Continuity Check
Use an ohmmeter to measure the resistance value between the terminal.
RESISTANCE SPECIFICATION
| Switch Position | Tester Connection | Measurement Value |
|---|---|---|
| No push | 2-3 | Approximately 74 kΩ |
| "Speech" switch | Approximately 1.5 kΩ | |
| "Pick-up" switch | Approximately 3.3 kΩ | |
| "Hang-up" switch | Approximately 6.0 kΩ |
Checks whether there is a continuity between terminal No. 4 and 1.
CONTINUITY SPECIFICATION
| Tester connection | Specified condition |
|---|---|
| 4-1 | Continuity exists (2 Ω or less) |