LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brakes >> On-Vehicle Service >> Parking Brake Switch Check

Parking Brake Switch Check

  1. Remove the rear floor console assembly (Refer to REAR FLOOR CONSOLE ).
  2. Check for continuity between the parking brake switch terminal and the switch mounting bolt.
    CONTINUITY SPECIFICATION

    When the parking brake lever is pulled up: Continuity exists
    When the parking brake lever is released: No continuity
    Fig 1: Checking For Continuity Between Parking Brake Switch Terminal And Switch Mounting Bolt
    G05432741Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals