LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Chassis Electrical - 5 Of 5 >> ETACS >> Troubleshooting >> Input Signal Procedures >> Inspection Procedure 3: ETACS-ECU does not receive any signal from the key reminder switch. >> Comments On Trouble Symptom

Comments On Trouble Symptom

The key reminder switch input signal is used for the operation judgment of the functions below. If the signal is abnormal, these functions will not work.

scientia non olet · About LEMON Manuals