Inspection Procedure 3: The error code "ANTENNA ERROR" is displayed on the display.: Diagnosis
- STEP 1. Check if the antenna base or antenna rod are damaged.
Q: Are the antenna base or antenna rod damaged?
YES: Replace the antenna base or antenna rod.
NO: Go to Step 2.
- STEP 2. Check the connection between the antenna base and the antenna feeder.
Q: Is the connection between the antenna base and the antenna feeder normal?
YES: Go to Step 3.
NO: Repair the connection.
- STEP 3. Check if the antenna feeder is damaged.
Q: Is the antenna feeder damaged or bent?
YES: Repair or replace the antenna feeder.
NO: Go to Step 4.
- STEP 4. Check the connection between the antenna feeder cable and the satellite radio tuner.
Q: Is the connection between the antenna feeder and the satellite radio tuner normal?
YES: Go to Step 5.
NO: Repair the connection.
- STEP 5. Temporarily replace the antenna base, and check if "ANTENNA ERROR" is displayed on the display.
Q: Is "ANTENNA ERROR" displayed on the display?
YES: Replace the satellite radio tuner.
NO: Replace the antenna base.