LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Chassis Electrical - 2 Of 5 >> Headlight >> Removal And Installation >> Removal Service Points >> << B >> Bulb Removal < Vehicles With Discharge Headlight >

<< B >> Bulb Removal < Vehicles With Discharge Headlight >

CAUTION: Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.
  1. Twist the socket cover to remove.
    Fig 1: Twisting Socket Cover
    G05434342Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Disconnect the igniter.
  3. Release the bulb securing spring, and remove the bulb.
    Fig 2: Identifying Bulb Securing Spring And Igniter
    G05434343Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals