LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Chassis Electrical - 2 Of 5 >> Headlight >> Inspection >> Bracket Repair Of Headlight Assembly >> Repair Procedure Of Bracket C

Repair Procedure Of Bracket C

  1. Cut the damaged bracket C so that the cut surface becomes 3 mm (0.12 inch) or less from the headlight assembly body surface.
  2. Smoothen the bracket cut surface using sandpaper.
    Fig 1: Identifying Damage Bracket C
    G05434351Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Affix the repair bracket to the headlight assembly using the tapping screw.
    Fig 2: Identifying Repair Bracket C And Tapping Screw
    G05434352Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals