LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Chassis Electrical - 2 Of 5 >> Headlight >> Inspection >> Bracket Repair Of Headlight Assembly >> Repair Procedure Of Bracket A

Repair Procedure Of Bracket A

  1. Cut off the damaged bracket A.
  2. Remove the remaining bracket cut surface using the sandpaper.
    Fig 1: Identifying Damage Bracket A
    G05434347Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Affix the repair bracket to the headlight assembly using the tapping screw.
    Fig 2: Identifying Repair Bracket A And Tapping Screw
    G05434348Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals