Diagnostic Trouble Code Chart
CAUTION:
On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnostic trouble code(s) associated with other system may be set. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
DIAGNOSTIC TROUBLE CODE CHART
| DTC | Diagnostic item |
|---|---|
| B16A2 | Blown turn-signal light (LH) bulb |
| B16A3 | Turn-signal light (LH) short circuit |
| B16A4 | Blown turn-signal light (RH) bulb |
| B16A5 | Turn-signal light (RH) short circuit |