Column Switch (Switch Body Part) Continuity Check
- Remove the lighting switch and the wiper/washer switch.
- Check that the continuity is present for the same terminal numbers (No. 2-11) of the column switch body connectors that remain on the steering column.CONTINUITY SPECIFICATION
Column switch body Tester connection Specified condition - Lighting switch side connector
- Wiper/washer switch side connector
2 - 2
3 - 3
4 - 4
5 - 5
6 - 6
7 - 7
8 - 8
9 - 9
10 - 10
11 - 11Continuity exists (2 Ω or less)