LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Chassis Electrical - 2 Of 5 >> Ac Power Supply >> Troubleshooting >> Symptom Procedures >> INSPECTION PROCEDURE 1: Even when the equipment (power consumption is 100 W or less) is connected, the equipment cannot be used. >> Technical Description (Comment)

Technical Description (Comment)

The wiring harness or connector between the AC inverter and AC outlet may be failed. When the wiring harness and connector are normal, the AC inverter or AC outlet may be failed.

NOTE: When inside of the vehicle is held at high temperature (35°C or more) for a long time (for example under the scorching sun), if the power supply is used with the vehicle parked, its operation may be automatically stopped to prevent the power supply unit from being overheated. After the AC inverter operation is stopped, when the AC inverter temperature decreases, the power automatically turns to ON. Also, if the equipment is AC 100 V but not 100 W or less, the equipment cannot be used even when it is connected.
scientia non olet · About LEMON Manuals