Seat Belt Buckle Switch Continuity Check (Passenger's Side)

Power supply voltage: 5V 

VOLTAGE SPECIFICATIONS

Power supply connection	Check condition	Normal condition
Connect terminal No.1 to the negative power supply (5V) terminal. Connect terminal No.2 to the positive power supply (5V) terminal.	When the seatbelt is connected	12 - 17 mA
	When the seatbelt is disconnected	4 - 7 mA

Fig 1: Identifying Seat Belt Buckle Switch Connector (Passenger's Side)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.