Inspection Of The Heated Seat Switch For Continuity

Inspect the heated seat switch for continuity.

Fig 1: Identifying Heated Seat Switch Connector Terminal

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

SWITCH CONTINUITY SPECIFICATIONS

Switch position	Terminal number	Normal value	Note
HI	1 - 2	Continuity exists (2 Ω or less).
	2(+) - 6(-)	Continuity exists (2 Ω or less).	Indicator
	3 - 4	Continuity exists (2 Ω or less).	Illumination
OFF	3 - 4	Continuity exists (2 Ω or less).	Illumination
LOW	2 - 5	Continuity exists (2 Ω or less).
	2(+) - 6(-)	Continuity exists (2 Ω or less).	Indicator
	3 - 4	Continuity exists (2 Ω or less).	Illumination