LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2008 >> Outlander LS, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Chassis Electrical - 2 Of 5 >> Headlight >> Diagnosis >> Symptom Procedures >> Inspection Procedure 3: The headlights do not illuminate when the lighting switch is at the "PASSING" position, but the low-beam illuminates (high-beam and low-beam cannot be changed) with the switch at the "HEAD" position. >> Notes

Inspection Procedure 3: The headlights do not illuminate when the lighting switch is at the "PASSING" position, but the low-beam illuminates (high-beam and low-beam cannot be changed) with the switch at the "HEAD" position.: Notes

CAUTION: Whenever the ECU is replaced, ensure that the power supply circuit, the ground circuit and the communication circuit are normal.
scientia non olet · About LEMON Manuals