Symptom Chart
WARNING: This page is about a different variant/trim than selected.
SYMPTOM CHART
| Symptom | Reference page |
|---|---|
| Communication between the scan tool and AWC-ECU cannot be established | INSPECTION PROCEDURE 1: COMMUNICATION BETWEEN THE SCAN TOOL AND AWC-ECU CANNOT BE ESTABLISHED |
| Mode does not change even when the AWC switch is pressed. | < VEHICLES WITH STEERING WHEEL AUDIO REMOTE CONTROL SWITCH > |
| < VEHICLES WITHOUT STEERING WHEEL AUDIO REMOTE CONTROL SWITCH > | |
| AWC-ECU power supply circuit malfunction | INSPECTION PROCEDURE 3: AWC-ECU POWER SUPPLY CIRCUIT MALFUNCTION |
| AWC control mode display is flashing. (Diagnostic trouble code No. C161F or C1621 is set) | This is the symptom that AWC-ECU suspends the control to protect the actuator during severe driving, and not a malfunction. Turn the ignition switch from OFF to ON to return to control. |