Speaker Check

Select "Speaker Check" on "Service" screen.

Fig 1: Scan Tool Display - Speaker Check
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Select a speaker to be checked, and play test tone through the speaker.
NOTE:
- The number of the speakers being displayed depends on how many speakers are connected.
- Volume cannot be adjusted while test tone is being played.
- During the test, only the selected speaker sounds. If "Back" is selected during the test, the test tone will disappear.
  
  Fig 2: Scan Tool Display - Speaker Check
  Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.