Position Light Bulb Replacement

When replacing the right bulb, lift the radiator condenser tank upward, and remove it. When replacing the left bulb, remove the relay box. < Vehicles without discharge headlight >

Fig 1: Identifying Radiator Condenser Tank
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Relay Box With Torque Specifications
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Remove the front splash shield assembling clip shown in the figure, and turn up the front splash shield. < Vehicles with discharge headlight >

Fig 3: Locating Front Splash Shield Assembling Clip
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Twist the position light socket to remove.

Fig 4: Twisting Position Light Socket
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.