Nominal Resistance Of The Fuel Level Sensor
When float of the fuel level sensor is in stopper positions F and E, ensure that resistance between the fuel level sensor terminal and ground terminal is within the standard value.
Standard value:
FLOAT POSITION CHART
| Float position | Gauge resistance value (ohms) | |
|---|---|---|
| Main | Sub | |
| Stopper position "F" | 6. 5 ± 1.0 | 6. 5 ± 1.0 |
| Stopper position "E" | 41.9 ± 1.0 | 78.1 ± 1.0 |
When the float is moved slowly between stopper positions "F" and "E", ensure that the resistance is smoothly changing.