Individual Component Service
WARNING:
- If heat damage occurs during paint work, remove the SRS-ECU, the air bag modules, the clock spring, front seats, impact sensor and the seat belt with pre-tensioner. Recheck the SRS system operability after reinstalling them.
- SRS-ECU, air bag module, clock spring, front seats, impact sensor: 93°C (200° F) or more
- Seat belt with pre-tensioner: 90°C (194° F) or more
- If the SRS components are removed for the purpose of inspection, sheet metal repair, painting, etc., they should be stored in a clean, dry place until they are reinstalled.
If the SRS components are to be removed or replaced as a result of maintenance, diagnosis, etc., follow the appropriate procedure in this section. Refer to (FRONT IMPACT SENSOR , SRS-ECU , AIR BAG MODULES AND CLOCK SPRING , SIDE-AIRBAG MODULE , FRONT SEAT ASSEMBLY , SIDE IMPACT SENSOR , CURTAIN AIR BAG MODULE and SEAT BELT WITH PRE-TENSIONER ).