Inspection Procedure 1: Daytime running lights do not illuminate normally: Notes

CAUTION: Whenever the ECU is replaced, ensure that the input and output signal circuits are normal.

Fig 1: Daytime Running Lights Circuit Diagram

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Identifying Connector C-312

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Identifying Connector A-23X

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 4: Identifying Connector A-41 And A-46

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 5: Identifying Connector A-51

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.