LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mitsubishi
>>
2007
>>
Outlander LS, FWD
>>
Repair and Diagnosis
>>
Accessories & Equipment
>>
Gauges & Instrument Panels
>>
Chassis Electrical
>>
ETACS
>>
Diagnosis
>>
Input Signal Procedures
>>
Inspection Procedure 5: ETACS-ECU does not receive any signal from the front door switch (LH)
>>
Troubleshooting Hints
Troubleshooting Hints
The front door switch (LH) may be defective
The ETACS-ECU may be defective
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
Fig 1: Identifying Front Door Switch (LH) Connector D-23
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.