LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Outlander LS, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Chassis Electrical >> ETACS >> Diagnosis >> Input Signal Procedures >> Inspection Procedure 10: ETACS-ECU does not receive any signal from the hood switch >> Technical Description (Comment)

Technical Description (Comment)

If there is an error to the hood switch input signal, the hood switch signal is no longer output to the communication line.

Fig 1: Identifying Hood Switch Connector A-06
G04873826Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals