LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Outlander ES >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Chassis Electrical >> Lighting >> Fog Light >> On-Vehicle Service >> Bulb Replacement

Bulb Replacement

  1. Remove the bolt under the fog light bracket and tilt the fog light to ease the bulb pulling-out.
    CAUTION: Don't touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol or thinner immediately and dry well, and then install it.
  2. Disconnect the connector and withdraw the bulb.
  3. Replace the bulb, and connect securely the connector.
    Fig 1: Identifying Fog Light And Bracket
    G04873729Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Locating Fog Light Bulb
    G04873730Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals