Inspection Procedure 2: The right or left daytime running light does not illuminate: Notes

CAUTION: Whenever the ECU is replaced, ensure that the input and output signal circuits are normal.

Fig 1: Daytime Running Light Diagram

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Identifying Connector A-23X

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Identifying Connector A-42 And A-47

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 4: Identifying Connector A-52

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.