LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Outlander ES >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Chassis Electrical >> ETACS >> Diagnosis >> Input Signal Procedures >> Inspection Procedure 7: ETACS-ECU does not receive any signal from the rear door switch (LH) >> Technical Description (Comment)

Technical Description (Comment)

If there is an error to the rear door switch (LH) input signal, the rear door switch (LH) signal is no longer output to the communication line.

Fig 1: Identifying ETACS-ECU Connector C-313
G04873810Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals