LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Outlander ES >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Chassis Electrical >> ETACS >> Diagnosis >> Input Signal Procedures >> Inspection Procedure 2: ETACS-ECU does not receive any signal from the ignition switch (IG1) >> Technical Description (Comment)

Technical Description (Comment)

If there is an error to the ignition switch (IG1) input signal, or the IG1 relay inside the ETACS-ECU does not operate, the ignition switch (IG1) signal is no longer output to the communication line.

scientia non olet · About LEMON Manuals