LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2007 >> Outlander ES >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Chassis Electrical >> ETACS >> Diagnosis >> Input Signal Procedures >> Inspection Procedure 11: ETACS-ECU does not receive any signal from the hazard warning light switch >> Technical Description (Comment)

Technical Description (Comment)

If there is an error to the hazard warning light switch input signal, the hazard warning light switch signal is no longer output to the communication line.

Fig 1: Identifying Center Panel Unit Connector C-104
G04873830Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals